Proroute Support Tickets / Helpdesk Proroute help desk Knowledgebase
Important Guides and Information Applicable to all Proroute Routers
Suggested knowledgebase articles:

Knowledgebase Important Guides and Information Applicable to all Proroute Routers

Articles in this category

Important Device Security Guidelines & Settings

This guide explains the essential security features of your router and how they protect your network. It will help you locate these settings, understand their purpose, and configure your router with a...

How to access the router's web interface

This page will guide you through accessing and logging into the router's web interface. This will then allow you to configure the router' settings. To access the web interface of the router, connect a...

Firmware upgrade process

To keep your router up to date with the latest functions and security features, upgrade to the latest Firmware Level.  1) Download a copy of the latest FW level to your machine, this will be a .bin fi...

Restore Router to Default Factory Settings (Factory Reset)

Performing a factory reset on the router is a reliable way to clear any problematic configurations in the router, and is one of the best tools for troubleshooting and fixing issues. 

Configure APN settings (Connect Router to the Internet with a SIM)

In order for the router to make an internet connection to a mobile network, the correct APN settings for the SIM need to be configured in the router.  If you are using a standard SIM with public APN (...

ICMP Check / Ping Reboot (Avoid remote site engineer call-outs)

ICMP Check (also know as Ping Reboot) this is highly useful service which is recommended in most remote router installations, especially in unmanned locatio

Set up Port Forwarding

Port forwarding allows a redirection of incoming traffic from WAN to another IP address and port on the LAN. In practice, this allows you to connect over the internet to your devices which are connect...

Change WAN port to act as LAN port

To change the WAN port to be a LAN port, go to Network > Operation Mode.  Tick box 'Wired WAN acts as LAN', then save and apply.